簡介
132 x 64 Bistable Display Driver with Controller
CMOS
SSD1603 is a single-chip CMOS bistable display driver with controller for dot-matrix type bistable display. It consists of high-voltage driving outputs for driving maximum 132 Segments x 64 Commons. Charge Pump, On-Chip Oscillator and Bias Divider are built in for minimal system area.
Contact our sales representative for more information:
Features
- Power supply
– VDD = 2.4V to 3.5Vfor IC logic and analog
– V0= 14.0V to 35.0Vfor Panel driving
– VDDIO= 1.6V to VDDfor MCU interface
- Resolution: 132 x 64 dot matrix panel
- Extra 2 dummy segments and 2 dummy commons for dummy ITO area driving
- On chip 132 x 64 bit graphic display RAM
- Charge pump with 35V output
- Circuit selectable charge pump multiplier ratio
- On chip charge pump or external panel driving power supply selectable
- Column remap and COM remap scan function
- Vertical scroll by COM and RAM display offset
- Partial COM display update
- Programmable duration for each driving phase
- Programmable MUX ratio
- Programmable on chip bias, 1/4, 1/5, 1/6, 1/7, 1/8, 1/9
- 8-bit 80 parallel / 8-bit 68 parallel / 3 & 4-wire SPI support / I2C interface
- Slim die design for COF / TCP
Ordering Information
| Ordering Part No. | SSD1603Z |
| Package | Gold Bump Die |
| pakcageInformation | Min SEG, COM pad pitch: 40µ Min pad pitch: 40µm |
| Ordering Part No. | Package | pakcageInformation |
|---|---|---|
| SSD1603Z | Gold Bump Die | Min SEG, COM pad pitch: 40µ Min pad pitch: 40µm |